Guide to Common Buffing Wheel And Compound Combinations

The selection of a buffing wheel is a very complex job, especially when you are not aware of the ins and out of it. If you are one of those searching for the answer to a simple guide for buffing wheels and compound combinations. 

You are at the right spot, as this guide is everything that can help you understand in detail. Through this guide, you will come to know which buffing wheels and buffing compounds will provide you with the best experience for different steps of polishing and buffing, depending upon the material you are working with.

Let's look ahead for the same: 

Working with Gold and Silver

Working with plated gold and silver, which is regular, includes a fragile coating for this; you have to use a cotton flannel wheel with standard red rouge buffing compounds or water dissolving red rouge to give a final touch or finishing polishing.

Working with Nickel and Chrome Plated

A Stitched muslin wheel with buffing compound or white rouge is used when you mainly work on a piece with nickel or chrome coating for final cutting and the initial stage of polishing for the process. The end-stage of polishing requires using a canton flannel wheel with water-soluble red rouge content or regular buffing compound.

Working with Copper, Brass, Aluminium, Pot Metals and other Soft Metals

Use an uncombed cotton buffing wheel and black emery buffing compound to remove scratches and further surface damage in case if you are working with one of these softer metals, then it is preferable.

A stitched muslin wheel and brown Tripoli buffing compound should be used for the procedure's final cutting and early polishing stages. Finally, you have to use a loose wheel and white rouge buffing compound for the last polishing stage.

Working with Stainless Steel

If you are dealing with stainless steel, you have to look at things differently than traditional steel: uncombed cotton buff wheel and black emery buffing compound at an initial for rough cutting to remove imperfections.'

In the middle stage, you have to use a stitched muslin wheel at the last stage of cutting and the beginning of polishing the metal with a green rouge buffing compound.

A loose wheel with a green rouge buffing compound is used to meet the need for final polishing at the last stage.

Working with Plastics

 Working with plastics, you have to use a water dissolving red rogue agent or plastic buffing compound with a loose uncombed cotton buff wheel or unstitched for all the stages that comprise three steps of polishing right from cutting roughly to the final polishing stage. 

WRAPPING UP!

Above mentioned are some tips that will guide in selecting. You can make the right decision by first considering your needs and expectations with the wheel. And then, through the features listed above, you can make the right decision and choose your pick for the same.